Lathe Clamp

Looking for John Deere Tractor for sale? Searching for John Deere Tractor or like listings? Our web site promotes an enormouse selection of John Deere Tractor, with items such as Massey Ferguson, Baler, Front Loader, Zero Turn, and many more. Browse our wide collection, or try doing a search for a more specific Lathe Clamp with the search bar. We have access to hundreds of thousands of products from retailers online, so we may have what you're searching for! Buy Lathe Clamp today!

New Kitagawa Lathe Chuck Bb206 M60 P15 Thread A2-5 Samchully Mh-206

New Kitagawa Lathe Chuck Bb206 M60 P15 Thread A2-5 Samchully Mh-206 - $1700.00

New Kitagawa Lathe Chuck Bb206 M60 P15 Thread A2-5 Samchully Mh-206

M60 X 1.5 Drawtube Adapter Nut. A2-5 Spindle Adapter.


Km Systems Km50clavvdi5080 Clamplathe Km50 Km-loc Vdi Axial M

Km Systems Km50clavvdi5080 Clamplathe Km50 Km-loc Vdi Axial M - $1963.54

Km Systems Km50clavvdi5080 Clamplathe Km50 Km-loc Vdi Axial M

Clamp.


Lot Of 2 Smw 12 320te 222 6 Jaw Hydraulic Lathe Chucks

Lot Of 2 Smw 12 320te 222 6 Jaw Hydraulic Lathe Chucks - $2000.00

Lot Of 2 Smw 12 320te 222 6 Jaw Hydraulic Lathe Chucks

Lot Of (2) Smw 12 320te 2+2+2 (6 Jaw) Hydraulic Lathe Chucks. These Units Are In Very Good Condition So The Only Some Minor Surface Rust And Grime. One Was Protected In A Protective Wax And Is Possibly Unused. One Of Them Includes The Mounting Bolts But No Other Accessories Are Included. They Come Exactly As Seen Pictured. See All Photos To Be Sure Of What Youre Getting. Local Pickup In Woodruff, Sc. I Can Help Facilitate With Freight Shipping.


Gisholt 21 3 Jaw Manual Lathe Chuck Turning

Gisholt 21 3 Jaw Manual Lathe Chuck Turning - $1650.00

Gisholt 21 3 Jaw Manual Lathe Chuck Turning

Gisholt 21 3 Jaw Manual Lathe Chuck. A1-15 Mount. 560 Lbs Condition Is "used". Local Pick Up Welcome, Or We Can Palletize For Shipping.


Km Systems Km50ncms32 Clamplathe Km50 Rnd Shank D508x3048

Km Systems Km50ncms32 Clamplathe Km50 Rnd Shank D508x3048 - $1790.34

Km Systems Km50ncms32 Clamplathe Km50 Rnd Shank D508x3048

Clamp.


New Mmk Matsumoto 10 Lathe Chuck M76 P15 Thread A2-8 Ha8-10-66

New Mmk Matsumoto 10 Lathe Chuck M76 P15 Thread A2-8 Ha8-10-66 - $1800.00

New Mmk Matsumoto 10 Lathe Chuck M76 P15 Thread A2-8 Ha8-10-66

M76 P1.5 Draw Tube Thread On Chuck. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M76 Thread If You. New Mmk (matsumoto) Lathe Chuck Ha8-10-66, 10" 3 Jaw Power Chuck. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.


New Samchully Lathe Chuck Hs-10 A2-8 M85 P2 Thread Kitagawa B 210

New Samchully Lathe Chuck Hs-10 A2-8 M85 P2 Thread Kitagawa B 210 - $2100.00

New Samchully Lathe Chuck Hs-10 A2-8 M85 P2 Thread Kitagawa B 210

Powergrip Samchully Lathe Chuck Hs-10, 10" 3 Jaw Power Chuck, New. M85 P2 Drawtube Nut Thread Size. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. Chuck Was Removed Of A New Machine And Replaced With A Special Chuck.


New Sca Sweden 10 2pc Jaw Forged Steel 3-jaw Lathe Chuck L-0 L0 Back 2911

New Sca Sweden 10 2pc Jaw Forged Steel 3-jaw Lathe Chuck L-0 L0 Back 2911 - $1950.00

New Sca Sweden 10 2pc Jaw Forged Steel 3-jaw Lathe Chuck L-0 L0 Back 2911

This Sale Is For New Sca 10" 2pc Jaw 3-jaw Precision Lathe Chuck. Direct Mount Low Profile L0 Back. Part Number 8310l0. Made In Sweden. A Beautiful Tool Featuring The Finest European Craftsmanship , And Materials . Comes Covered In Protective Packing Grease , Easily Cleaned Off With Some Solvent To Reveal Beautifully Machined And Ground Steel Body, And Hardened Pinion, Scroll And Jaws. $2911 List.


Km Systems Km40cl2sl1660d Clamplathe Km40 2 1 Sq Shank Replacem

Km Systems Km40cl2sl1660d Clamplathe Km40 2 1 Sq Shank Replacem - $1640.69

Km Systems Km40cl2sl1660d Clamplathe Km40 2 1 Sq Shank Replacem

Clamp.


Km Systems Km80ncmf Clamplathe Km80 Ncm Xflngmnt Height1

Km Systems Km80ncmf Clamplathe Km80 Ncm Xflngmnt Height1 - $1604.61

Km Systems Km80ncmf Clamplathe Km80 Ncm Xflngmnt Height1

Clamp.


Schunk Rota Thon Plus 165-43 Lathe Chuck 100733

Schunk Rota Thon Plus 165-43 Lathe Chuck 100733 - $2000.00

Schunk Rota Thon Plus 165-43 Lathe Chuck 100733

Used In Good Condition. Used Surplus. See Photos .


New Atlas Workholding Lathe Chuck Atl8-a6 8 3 Jaw Chuck Kitagawa B 208

New Atlas Workholding Lathe Chuck Atl8-a6 8 3 Jaw Chuck Kitagawa B 208 - $1600.00

New Atlas Workholding Lathe Chuck Atl8-a6 8 3 Jaw Chuck Kitagawa B 208

Pratt Burnerd Atlas Workholding. Blank Drawtube Nut Can Be Machined To Fit Your Lathe Drawtube Thread Size. With A2-6 Spindle Adaptor Plate.


Kitagawa B-208 3 Jaw Lathe Chuck M60 P15 Thread A2-6 Samchully Hs-08

Kitagawa B-208 3 Jaw Lathe Chuck M60 P15 Thread A2-6 Samchully Hs-08 - $1700.00

Kitagawa B-208 3 Jaw Lathe Chuck M60 P15 Thread A2-6 Samchully Hs-08

Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M60 P 1.5 Thread If You. M 60 P1.5 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.


Samchully Sh-15052 Cc-du Hydraulic Cylinder Actuator For Lathe Power Chuck

Samchully Sh-15052 Cc-du Hydraulic Cylinder Actuator For Lathe Power Chuck - $1900.00

Samchully Sh-15052 Cc-du Hydraulic Cylinder Actuator For Lathe Power Chuck

Samchully Hydraulic Cylinder. Seom Hydraulic Cylinder. Smw Autoblok Cylinder. Lmc Cylinder.


Km Systems Km50cl2sr1675d Clamplathe Km50 Loc2 1x1 Sq Shank Repl

Km Systems Km50cl2sr1675d Clamplathe Km50 Loc2 1x1 Sq Shank Repl - $1887.70

Km Systems Km50cl2sr1675d Clamplathe Km50 Loc2 1x1 Sq Shank Repl

Clamp.


Kitagawa Hoh-7k 3 Jaw Counter Balanced Lathe Chuck M52 P 15 Thread

Kitagawa Hoh-7k 3 Jaw Counter Balanced Lathe Chuck M52 P 15 Thread - $1700.00

Kitagawa Hoh-7k 3 Jaw Counter Balanced Lathe Chuck M52 P 15 Thread

Chuck Was Taken Off New Lathe And Replaced With A Different Chuck. M 52 P1.50 Draw Tube Nut Thread.


Kitagawa B-208 3 Jaw Lathe Chuck M60 P15 Thread A2-6 Samchully Hs-08

Kitagawa B-208 3 Jaw Lathe Chuck M60 P15 Thread A2-6 Samchully Hs-08 - $1700.00

Kitagawa B-208 3 Jaw Lathe Chuck M60 P15 Thread A2-6 Samchully Hs-08

Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M60 P 1.5 Thread If You. M 60 P1.5 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.


New Schunk Lathe Chuck Rota Ncd 185-54 3 Jaw Power Chuck A2-6

New Schunk Lathe Chuck Rota Ncd 185-54 3 Jaw Power Chuck A2-6 - $2000.00

New Schunk Lathe Chuck Rota Ncd 185-54 3 Jaw Power Chuck A2-6

1.50mm X 60 Degree Master Jaw Serrations. Chuck Was Removed From New Machine And Replaced With A Special Chuck. A2-6 Spindle Adapter.


New Howa 8 Lathe Chuck H037m8 Blank Drawtube Nut Flat Back

New Howa 8 Lathe Chuck H037m8 Blank Drawtube Nut Flat Back - $1900.00

New Howa 8 Lathe Chuck H037m8 Blank Drawtube Nut Flat Back

Howa Cnc Lathe Chuck H037m8, 8" 3 Jaw Power Chuck, New, Never Used. Blank Draw Tube Nut. Flat Back, Ready To Mount Spindle Adaptor Plate.


Kitagawa Bt-210 Two Jaw Lathe Chuck M78 P2 Thread A2-8 Samchully Hst 10

Kitagawa Bt-210 Two Jaw Lathe Chuck M78 P2 Thread A2-8 Samchully Hst 10 - $1900.00

Kitagawa Bt-210 Two Jaw Lathe Chuck M78 P2 Thread A2-8 Samchully Hst 10

Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M78 Thread If You. M 78 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.


New Kitagawa Lathe Chuck Bb206 M60 P20 Thread A2-5 Samchully Mh-206

New Kitagawa Lathe Chuck Bb206 M60 P20 Thread A2-5 Samchully Mh-206 - $1700.00

New Kitagawa Lathe Chuck Bb206 M60 P20 Thread A2-5 Samchully Mh-206

M60 X 2.0 Drawtube Adapter Nut. A2-5 Spindle Adapter. New, Never Used, Was Taken Off New Machine And Replaced By Special Chuck.


New Lmc Lathe Chuck Pc-10-82-01 M85 P2 Thread

New Lmc Lathe Chuck Pc-10-82-01 M85 P2 Thread - $1600.00

New Lmc Lathe Chuck Pc-10-82-01 M85 P2 Thread

M85 P2.0 Drawtube Adapter Nut. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M85 Thread If You. Chuck Was Never Used, It Was Removed Off A New Lathe And Replaced With A Special Chuck.


Rebuilt Kitagawa F1236h-28 Hydraulic Cylinder Actuator For Lathe Chuck F1236

Rebuilt Kitagawa F1236h-28 Hydraulic Cylinder Actuator For Lathe Chuck F1236 - $1900.00

Rebuilt Kitagawa F1236h-28 Hydraulic Cylinder Actuator For Lathe Chuck F1236

This Model Will Also Repace The F1236. I Rebuild Chuck Cylinder Actuators. This Cylinder Is As Good As A New Cylinder. (40 Kgfcm Squared). Cylinder Had A Complete Rebuild Consisting Of.


Rohm 3 Jaw Zs 3153 12-12 Centering Manual Lathe Chuck Steel Set Spare Jaws

Rohm 3 Jaw Zs 3153 12-12 Centering Manual Lathe Chuck Steel Set Spare Jaws - $1799.99

Rohm 3 Jaw Zs 3153 12-12 Centering Manual Lathe Chuck Steel Set Spare Jaws

Steel Body. Din 55027 With Studs And Lock-nuts. Centering Manual Lathe Chuck Steel. Includes A Set Spare Jaws. Gear Hobs, Lathe Chucks. Mountstud & Lock Nut. Max Total Clamping Force Kn69. Materialsteel Body.


Kitagawa B-210 3 Jaw Lathe Chuck M60 P2 Thread A2-6 Samchully Hs-10

Kitagawa B-210 3 Jaw Lathe Chuck M60 P2 Thread A2-6 Samchully Hs-10 - $1900.00

Kitagawa B-210 3 Jaw Lathe Chuck M60 P2 Thread A2-6 Samchully Hs-10

Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M60 Thread If You. M 60 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.


New Sca Sweden 2pc Jaw Steel 10 3-jaw Precision Lathe Chuck D1-5 Back 2733

New Sca Sweden 2pc Jaw Steel 10 3-jaw Precision Lathe Chuck D1-5 Back 2733 - $1850.00

New Sca Sweden 2pc Jaw Steel 10 3-jaw Precision Lathe Chuck D1-5 Back 2733

New Sca 10" Steel 3-jaw Lathe Chuck. D5 Back. Part Number 8310 D5. Made In Sweden This Sale Is For New Sca 10" 3-jaw Lathe Chuck. D1-5 Direct Mount Back. . Made In Sweden. A Beautiful Tool Featuring The Finest European Craftsmanship , And Materials . Comes Covered In Protective Packing Grease , Easily Cleaned Off With Some Solvent To Reveal Beautifully Machined And Ground Steel Body And Hardened Pinions, Scroll And Jaws. $2733 Usd List.


New Seoam Cah-10 Lathe Chuck M76 P15 Thread A2-8 Kitagawa B-210

New Seoam Cah-10 Lathe Chuck M76 P15 Thread A2-8 Kitagawa B-210 - $2100.00

New Seoam Cah-10 Lathe Chuck M76 P15 Thread A2-8 Kitagawa B-210

Seoam Lathe Chuck Cah-10, 10" 3 Jaw Power Chuck, New, Never Used. Seoam Is Owned By Hwacheon Machine Tool Which Produces Quality Cnc Lathes. For Usa Dealer And Tech Support On Seoam Chucks M76 P1.5 Drawtube Nut Thread Size.


Woodworth Ubl-8 Compensating 3 Jaw Lathe Chuck 8 Pull Down Chuck

Woodworth Ubl-8 Compensating 3 Jaw Lathe Chuck 8 Pull Down Chuck - $1600.00

Woodworth Ubl-8 Compensating 3 Jaw Lathe Chuck 8 Pull Down Chuck

Soul-woodworth Ubl 8 3 Jaw Compensating Lathe Chuck. Photo Six Shows Chuck Set Up For Non Rocking Jaws (jaw Blocks In Place). Photo Seven Shows Chuck Set Up For Rocking Jaws ( Jaw Blocks Removed). Non Rocking Jaws Are Used With One Gripper In Center Of Jaw Insert.


Km Systems Km40clavvdi4070 Clamplathe Km40 Km-loc Vdi Axial M

Km Systems Km40clavvdi4070 Clamplathe Km40 Km-loc Vdi Axial M - $1740.15

Km Systems Km40clavvdi4070 Clamplathe Km40 Km-loc Vdi Axial M

Clamp.


New Kitagawa Lathe Chuck B 206 6 3 Jaw A2-5 Samchully Hs 06 M42x15 Thread

New Kitagawa Lathe Chuck B 206 6 3 Jaw A2-5 Samchully Hs 06 M42x15 Thread - $1700.00

New Kitagawa Lathe Chuck B 206 6 3 Jaw A2-5 Samchully Hs 06 M42x15 Thread

A2-5 Spindle Adapter. New, Never Used.


34-703-9 Self-centering 12 Lathe Chuck

34-703-9 Self-centering 12 Lathe Chuck - $2008.90

34-703-9 Self-centering 12 Lathe Chuck

6-jaw, Self-centering, Plain Back, Scroll Lathe Chuck. 1 Chuck Wrench. 2-piece Reversable Jaws Are Hardened And Precision Ground. 1 Set Of Two-piece Hardened Reversable Jaws. 3.257" Thru Hole.


Kitagawa N-15 15 3 Jaw Lathe Chuck A2-11 Spindle Mount

Kitagawa N-15 15 3 Jaw Lathe Chuck A2-11 Spindle Mount - $2100.00

Kitagawa N-15 15 3 Jaw Lathe Chuck A2-11 Spindle Mount

A2-11 Spindle Adaptor Plate. Reassembled And Greased By A Qualified Chuck Service Man. Ready To Run.


Btc 16 4 Jaw D1-6 Independent Lathe Chuck 2 Piece Jaws Reversible

Btc 16 4 Jaw D1-6 Independent Lathe Chuck 2 Piece Jaws Reversible - $1699.00

Btc 16 4 Jaw D1-6 Independent Lathe Chuck 2 Piece Jaws Reversible

16" 4-jaw D1-6 Cam-lock Independent Lathe Chucks 2 Piece Jaws Reversible. Top Jaws Are Reversible. Lathe Chuck Wrench Supplied. Self Centering Jaws, Hardened And Precision Ground. Direct Mounting Chuck With Camlock Nose.


New Kitagawa Lathe Chuck B 206 6 3 Jaw A2-5 Samchully Hs 06 M55x15 Thread

New Kitagawa Lathe Chuck B 206 6 3 Jaw A2-5 Samchully Hs 06 M55x15 Thread - $1600.00

New Kitagawa Lathe Chuck B 206 6 3 Jaw A2-5 Samchully Hs 06 M55x15 Thread

A2-5 Spindle Adapter. New, Never Used, Was Taken Off New Machine And Replaced By Special Chuck.


Samchully Mh-210vi 3 Jaw Lathe Chuck M85 P2 Thread A2-6 Kitagawa Bb-210

Samchully Mh-210vi 3 Jaw Lathe Chuck M85 P2 Thread A2-6 Kitagawa Bb-210 - $1700.00

Samchully Mh-210vi 3 Jaw Lathe Chuck M85 P2 Thread A2-6 Kitagawa Bb-210

Samchully 3 Jaw Power Lathe Chuck. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M85 Thread If You. M 85 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.


Km Systems Km80ncmef Clamplathe Km80 Ncm Xflngmnt Height5

Km Systems Km80ncmef Clamplathe Km80 Ncm Xflngmnt Height5 - $1604.61

Km Systems Km80ncmef Clamplathe Km80 Ncm Xflngmnt Height5

Clamp.


Km Systems Km50clnss40316 Clamplathe Km50 Km-loc Rnd Shank D635

Km Systems Km50clnss40316 Clamplathe Km50 Km-loc Rnd Shank D635 - $1751.48

Km Systems Km50clnss40316 Clamplathe Km50 Km-loc Rnd Shank D635

Clamp.


New Smw Autoblok 250 Bb Lathe Chuck M85 P2 Thread Kitagawa B 210

New Smw Autoblok 250 Bb Lathe Chuck M85 P2 Thread Kitagawa B 210 - $1800.00

New Smw Autoblok 250 Bb Lathe Chuck M85 P2 Thread Kitagawa B 210

Smw Autoblok Lathe Chuck 200 Bb (200 Bbm), 10" 3 Jaw Power Chuck. M85 P2.0 Drawtube Adapter Nut. Chuck Was Never Used, It Was Removed Off A New Lathe And Replaced With A Special Chuck. 1.50mm X 60 Degree Master Jaw Serrations.


New Buck A4010 Super Life Power Lathe Chuck 10 Dia A2-8 Mount

New Buck A4010 Super Life Power Lathe Chuck 10 Dia A2-8 Mount - $1800.00

New Buck A4010 Super Life Power Lathe Chuck 10 Dia A2-8 Mount

New Buck A4010 Super Life Power Lathe Chuck, 10" Dia. Complete With A2-8 Spindle Plate Mount. Chuck Is Still Available Through Hardinge.


New Kitagawa Lathe Chuck B 206 6 3 Jaw A2-5 Samchully Hs 06 M52x15 Thread

New Kitagawa Lathe Chuck B 206 6 3 Jaw A2-5 Samchully Hs 06 M52x15 Thread - $1700.00

New Kitagawa Lathe Chuck B 206 6 3 Jaw A2-5 Samchully Hs 06 M52x15 Thread

A2-5 Spindle Adapter. New, Never Used.


Rebuilt Kitagawa S1875-21 Hydraulic Cylinder Actuator For Cnc Lathe Chucks1875

Rebuilt Kitagawa S1875-21 Hydraulic Cylinder Actuator For Cnc Lathe Chucks1875 - $2100.00

Rebuilt Kitagawa S1875-21 Hydraulic Cylinder Actuator For Cnc Lathe Chucks1875

This Cylinder Is Interchangeable With The S1875. I Rebuild Chuck Cylinder Actuators. This Cylinder Is As Good As A New Cylinder. (40 Kgfcm Squared). Cylinder Had A Complete Rebuild Consisting Of.


Carbide Inserts Cnc Lathe Cutter For Wc Type U Drill Bit Tool

Carbide Inserts Cnc Lathe Cutter For Wc Type U Drill Bit Tool - $1615.96

Carbide Inserts Cnc Lathe Cutter For Wc Type U Drill Bit Tool

Top Quality Products.


Km Systems Km50cl2nss32295 Clamplathe Km50 Loc2 Dia 2 Rnd Shank

Km Systems Km50cl2nss32295 Clamplathe Km50 Loc2 Dia 2 Rnd Shank - $1637.83

Km Systems Km50cl2nss32295 Clamplathe Km50 Loc2 Dia 2 Rnd Shank

Clamp.


Lathe Clamp Information

10" Aluminum Soft Jaws 1.5mm X 60° Serrated For B-210 Type Lathe Chucks (2.0 Ht). 1 Set Of Aluminum Pointed Soft Jaws For 10" B210 Type Chucks. Jaw Type Fits Cnc Lathe Chucks With 1.5mm X 60 Degrees Serrations. Hole Space 1.181" (30mm). Material Aluminum 6061-t6511 (material Produced In Usa - Mill Iso 90012008 Certified).

^^ Powerhold 8.25lh-3-a6fs Drawtube Thrust 6300lbs Chuck For Cnc Lathe (gw11)

We Are Quick To Respond And Resolve. We Do Not Have Power Cords To Provide Unless They Are Attached To The Item Or Unless Stated That They Are Provided. If One Is Pictured It Is For Testing Purposes Only Unless It Is Attached Or Stated That It Will Be Included.

5c Round Collet Precision Lathe Tool Lathing Tooling Chuck Workholding 9/16''. Drawbar Thread Size 1.041-24. Hardened And Precision Ground. External Thread Size 1.238-20 Rh. Overall Length 3-14" Rough Estimation .

Km Systems Km63ncms40 Clamp,lathe Km63 Rnd Shank D63.50x355.. Clamp.

Matsumoto 12" 3-jaw Hydraulic Lathe Chuck Ha11-iii-313.

New Bison Poland 12" 4-jaw Independent Steel Lathe Chuck Plain Back $2994. New Bison Poland 12" 4-jaw Independent Forged Steel Lathe Chuck. Plain Back. 2 Pc Top Jaws. Part Number 4307-12 Please See Additional Pictures Below The Description.

Gisholt 21” 3 Jaw Manual Lathe Chuck Turning. Gisholt 21 3 Jaw Manual Lathe Chuck. A1-15 Mount. 560 Lbs Condition Is "used". Local Pick Up Welcome, Or We Can Palletize For Shipping.

Kitagawa Lathe Chuck 10”

Kitagawa Lathe Chuck 10.

Kitagawa B-206 3 Jaw Lathe Chuck

This 3-jaw Chuck Is In Great Condition With Minor Surface Blemishes.

New Samchully Lathe Chuck Hs-10, A2-8, M85 P2 Thread, (kitagawa B 210) . Powergrip Samchully Lathe Chuck Hs-10, 10" 3 Jaw Power Chuck, New. M85 P2 Drawtube Nut Thread Size. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. Chuck Was Removed Of A New Machine And Replaced With A Special Chuck.

Woodworth Ubl-8 Compensating 3 Jaw Lathe Chuck 8" Pull Down Chuck. Soul-woodworth Ubl 8 3 Jaw Compensating Lathe Chuck. Photo Six Shows Chuck Set Up For Non Rocking Jaws (jaw Blocks In Place). Photo Seven Shows Chuck Set Up For Rocking Jaws ( Jaw Blocks Removed). Non Rocking Jaws Are Used With One Gripper In Center Of Jaw Insert.

4-piece Brake Lathe Bell Clamp & Cone Set For Large Trucks - 1-7/8" Arbor Usa. Medium To Heavy Duty Truck Brake Lathe Large Bell Clamp & Cone 4-piece Set For 1-78" Arbors Save Time With This Large Truck Bell Clamp And Cone Set For Medium Duty And Heavy Duty Trucks. This Set Comes With 1 Cone, 2 Bell Clamps And 1 Heavy Duty Spring (see Cone & Bell Clamp Sizes Below) ---(2) 9-14" Bell Clamps ---(1) 7.578" To 8.125" Cone ---(1) Heavy Duty Spring Part # 3026-1-78 We Also Carry Other Tire Changer, Wheel Balancer, Brake Lathe And Alignment Shop Tools. Check Out Our Ebay Store For More Information.

Kitagawa Hydraulic Cylinder Actuator For Lathe Power Chuck M1120hc21d.

New Kitagawa Y1230re25 Hydraulic Cylinder Actuator For Cnc Lathe (y1225re). This Cylinder Is Interchangeable With Y1225re And Y1225r. The Only Difference Is This Cylinder Has 30mm Stroke And The Y1225re Has 25mm Stroke.

Km Systems Km50clavvdi5080 Clamp,lathe Km50 Km-loc Vdi Axial M. Clamp.

Threaded Backplate Adapter 4" 4-hole 1-1/2"-8 For Lathe Chucks. Fits Most Plain Back Chucks.

Er32 3/4" Imperial Spring Collet For Cnc Milling Machine Engraving Lathe Tool. Fit All R8, Morse Tapper, Cat Bt Cnc Er32 Chuck Or Holder. Model Er32. 1 X Er32 34" Collet. Each Collet Is Manually Tested After It Has Been Processed And Produced. Beat 0.008mm. Material Advanced Spring Steel 65mn.

New Howa Lathe Chuck H011mb, 6" 3 Jaw Draw Down (pull Back) Power Chuck

New, Never Used. Serch Words Everything In Pictures Included.

Er-32 Er-40 Square Hex Collet Block Chuck Holder For Cnc Lathe Engraving Machine. Er-32 Er-40 Square Hex Collet Block Chuck Holder For Cnc Lathe Engraving Machine Descriptions 100% Brand New.for Fast Set-ups On Cnc Machines.can Be Used Standing Upright.made Of Tool Steel Hardened.high Strength And Hardness.durable In Use.through Hole Allows For Long Parts To Be Machined.material Hard Steelcolor Silver & Black Er-32 Square Collet Blocksize Approx. 45*65mm Er-32 Hex Collet Blocksize Approx. 45*70mm Er-40 Square Collet Blocksize Approx. 45*80mm Er-40 Hex Collet Blocksize Approx. 50*75mm Applicationfor Parallel, Square Or Hex Shapes As Well As For Cross Hole Drilling At 60, 90 Or 120 Degrees..

New Kitagawa Lathe Chuck B-205y, 5" 3 Jaw Power Chuck, A2-5 (samchully Hs 05). B-205, B205. Chuck Was Never Used, It Was Removed Off A New Lathe And Replaced With A Special Chuck. A2-5 Spindle Adapter. Removing Ejector Rod And Boring Out Center.

New Schunk Lathe Chuck Rota Ncd 185-54, 3 Jaw Power Chuck, A2-6 . 1.50mm X 60 Degree Master Jaw Serrations. Chuck Was Removed From New Machine And Replaced With A Special Chuck. A2-6 Spindle Adapter.

New Seoam Cah-06n Lathe Chuck, M52 X 1.5 Thread, A2-5 (kitagawa B-206). Seoam Lathe Chuck Cah-06n, 6" 3 Jaw Power Chuck, New, Never Used. Seoam Is Owned By Hwacheon Machine Tool Which Produces Quality Cnc Lathes. For Usa Dealer And Tech Support On Seoam Chucks M52 P1.5 Drawtube Nut Thread Size.

Bison 6 Jaws, 10" Diam, Self Centering Manual Lathe Chuck

Bison 6 Jaws, 10" Diam, Self Centering Manual Lathe Chuck Front Mount, Adjustable, Reversible, 1,900 Max Rpm, 2.992" Through Hole Diam, Forged Steel

New Sca Sweden 12" 3-jaw Lathe Chuck. A1-8 A8 Direct Mount. 2pc Reversible Jaws. New Sca Sweden 12" 3-jaw Lathe Chuck. A1-8 A8 Direct Mount. 2pc Reversible Jaws. Made In Sweden . The Chuck Is Shiny And New But Covered In Packing Grease A Beautiful Tool Featuring The Finest European Craftsmanship, And Materials. Premium Quality. Please See Additional Pictures Below The Description.

Kitagawa Hoh-6 3 Jaw Counter Balanced Lathe Chuck

Counter Balanced Power Chuck. Reassembled And Greased By A Qualified Chuck Service Man. Drawbar Operated. Ready To Run.

Btc 10" 4 Jaw D1-5 Independent Lathe Chuck 2 Piece Jaws Reversible . 10" 4-jaw D1-5 Cam-lock Independent Lathe Chucks 2 Piece Jaws Reversible. Top Jaws Are Reversible. Lathe Chuck Wrench Supplied. Self Centering Jaws, Hardened And Precision Ground. Direct Mounting Chuck With Camlock Nose.

Carbide Inserts Cnc Lathe Cutter For Wc Type U Drill Bit Tool. Top Quality Products.

Kitagawa B-8 3 Jaw Lathe Chuck, M55 P1.5 Thread A2-6

Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M55 P 2.0 Thread If You. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. A2-6 Spindle Adaptor Plate.

Mmk-seiki 10" Lathe Chuck Ea8-10-78

This Chuck Was Made By Mmk For Hitachi Seiki.

6" 3.1" Ht Kitagawa B206 Soft Steel Pointed Cnc Lathe Chuck Jaw Set Samchully A}

Lathe Chuck Size 6". Precision Ground Finish On Teeth To Provide A Tight Fit With The Master Jaw Of The Lathe Chuck. Jaw End Shape Pointed. Jaw Mounting Type 1.5mm X 60 Degree Serration. We Have More 3 Jaw Or 6 Jaw Lathe Chucks Available.

Schunk Rota Thon Plus 165-43 Lathe Chuck 100733

Used In Good Condition. Used Surplus. See Photos .

Km Systems Km50ncmss40125 Clamp,lathe Km50 Rnd Shank D2-1/2x5.59

Clamp.

Km Systems Km32ncmf Clamp,lathe Km32 Ncm Xflngmnt Height:7

Clamp.

New Kitagawa Lathe Chuck B-205y, (b205) M40x1.5 Thread, A2-5 (samchully Hs 05)

Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. Chuck Was Removed Off A New Machine And Replaced With A Special Chuck. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M40 Thread If You.

New Kitagawa N-08 Three Jaw Lathe Chuck, A2-6 (n 8). Chuck Was Removed From A New Machine And Replaced With A Special Chuck. With A2-6 Spindle Adaptor Plate. New Chuck, Never Used. 210 Mm (8.27") O.d.

12-1/2 Bison 6 Jaw "set Tru" Lathe Chuck

Whether Scroll, Independent Or Collet, These Chucks Have Been Replacing The Competitions For The Last 30 Years Without Sacrificing Production. 12-12" Bison Chuck 6 Jaw "settru" Fine Adj Lathe Chuck.

Kitagawa 10" Three-jaw Cnc Lathe Power Chuck W/ A2-8 Mount - #hja8-10. This Is A 10" Three-jaw Cnc Lathe Power Chuck W A2-8 Mount. Chuck Thickness 87mm. Draw Tube Threads M45 X P1.5. Mount A2-8. Through Hole 34mm.

5c Fixture Mount Precision Lathe Face Plate's, (1) Lot One Price!!!😀 (hardinge). 20 To 40yr. Old Tooling, Steel 5c Fixture Mount's, These Were Manufactured Before We Started Being Inundated By Junk, All Ground Shank's! Mfg. Japan, 2pc. Mfg. Taiwan, 6pc. Japan, (1) 1 X 5, (2) 1 X 4 Taiwan, (2) 1 X 3, (2) 1 X 2, (1) 2 X 3" Dia.

Samchully Sh-10036scdb Hydraulic Cylinder Actuator For Lathe Power Chuck

Samchully Hydraulic Cylinder. Seom Hydraulic Cylinder. Smw Autoblok Cylinder. Lmc Cylinder.

New Howa Hydraulic Cylinder Actuator For Lathe Power Chuck Hh11c 125



Threaded Back Plate Adapter 5" 4-hole 1-1/2"-8 For Lathe Chucks

Fits Most Plain Back Chucks.

34-703-9 Self-centering 12" Lathe Chuck

6-jaw, Self-centering, Plain Back, Scroll Lathe Chuck. 1 Chuck Wrench. 2-piece Reversable Jaws Are Hardened And Precision Ground. 1 Set Of Two-piece Hardened Reversable Jaws. 3.257" Thru Hole.

Btc 16" 4 Jaw D1-6 Independent Lathe Chuck 2 Piece Jaws Reversible . 16" 4-jaw D1-6 Cam-lock Independent Lathe Chucks 2 Piece Jaws Reversible. Top Jaws Are Reversible. Lathe Chuck Wrench Supplied. Self Centering Jaws, Hardened And Precision Ground. Direct Mounting Chuck With Camlock Nose.

New Rapidhold 10" 3-jaw Precision Steel Scroll Lathe Chuck. A1-8 Mount. 2pc Jaws

New Rapidhold 10" 3-jaw Precision Steel Scroll Lathe Chuck. A1-8 Direct Mount. 2pc Jaws. Part Number Hl10-51262. The Chuck Appears To Be Of Excellent Quality. It Appears To Have The Same Specs As Bison And We Were Told That They May Have Been Made By Bison And Private Labelled. We Have No Way To Confirm This. A Quality Product. 2 Pc. Jaws Are American Standard Tongue & Groove Jaws, Scrolls & Pinions Are Hardened And Precision Ground Please See Additional Pictures Below The Description.

Zweifel Reishauer / Alina Lathe Scroll / Bezel Chuck 5c Arbor

Zweifel Reishauer Alina Lathe Scroll Bezel Chuck 5c Arbor. I Have W 20 And W 25 Arbor You Need To Fit Too It

New! Jet 719100 Model Jwl-1015 10"x15" Wood Lathe!!

Manufacturers Part Number 719100. This Sturdy, Smooth-running 15" Mini-lathe Has The Power, Precision And Versatility To Turn Out Any Number Of Projects. When You're Ready To Make Your Ideas A Reality. Start Here.

Km Systems Km50ncms32 Clamp,lathe Km50 Rnd Shank D50.8x304.8

Clamp.

Samchully Mh-210vi 3 Jaw Lathe Chuck, M85 P2 Thread A2-6 (kitagawa Bb-210) . Samchully 3 Jaw Power Lathe Chuck. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M85 Thread If You. M 85 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

~50~ Boley + Leinen Lathe Collets 1/16" - 3/4" X 64ths ***vgc***. 50 Boley + Leinen Lathe Collets 116" - 34" X 64ths Vgc Collet Set 116" To 34" X 64ths, Missing 564, 1364, + 4364. Only 1 Collet Is Marked Boley & Leinen.

New Seoam Cah-06 Lathe Chuck, M52 P 1.5 Thread (kitagawa B-206). Seoam Lathe Chuck Cah-06, 6" 3 Jaw Power Chuck, New, Never Used. Seoam Is Owned By Hwacheon Machine Tool Which Produces Quality Cnc Lathes. For Usa Dealer And Tech Support On Seoam Chucks M52 P1.5 Drawtube Nut Thread Size.

Steady Rest Turning Lathe 12" Hole Leblond Makino Lion Okuma Daewoo Mori Haas

In Good Used Shape, Does Show Normal Wear.

Kitagawa Bt-210 Two Jaw Lathe Chuck, M78 P2 Thread A2-8 (samchully Hst 10)

Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M78 Thread If You. M 78 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

125 Type Lathe Spindle Assembly With Flange Connection Plate Transition Plate. Spindle X 1 Flange X 1 Pulley X1. 125 Spindle No Chuck Disk Locking Handle X1.

Mmk 15" Lathe Chuck Za11-15-120-06 (za11-15-120-15)

Mmk (matsumoto) Lathe Chuck Za11-15-120-06, 15" 3 Jaw Power Chuck. So In Summary, If You Are Replacing Your Worn Out 15" Mmk Chuck That Has A Different Draw Tube. Chuck Was Taken Off A Hitachi H40g Ht40g Lathe And Replaced With Special Chuck.

New Kitagawa Lathe Chuck Bb206, M60 P2.0 Thread, A2-5 (samchully Mh-206)

M60 X 2.0 Drawtube Adapter Nut. A2-5 Spindle Adapter. New, Never Used, Was Taken Off New Machine And Replaced By Special Chuck.

10" Hard Jaws For Kitagawa B-210 1.5mm X 60 Cnc Lathe Chuck Steel 3pc Set R}

Lathe Chuck Size 10". Precision Ground Finish On Teeth To Provide A Tight Fit With The Master Jaw Of The Lathe Chuck. We Have More 3 Jaw Or 6 Jaw Lathe Chucks Available Jaw Mounting Type 1.5mm X 60 Degree Serration.

(2) 3 Or 4 Jaw Lathe Chuck Keys 3/8" Square New!

Heat Treated Black Oxide Finish Has Grease Protective Coating.

Kitagawa B-210 3 Jaw Lathe Chuck, M60 P2 Thread A2-6 (samchully Hs-10)

Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M60 Thread If You. M 60 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

10" Bison 3 Jaw Lathe Chuck Direct Mount D1-6 Spindle Scroll 2-3/4" Through Hole

No Personal Checks Are Accepted. All Products Are As Is.

Bison 3 Jaws, 6" Diam, Self Centering Manual Lathe Chuck. Bison 3 Jaws, 6" Diam, Self Centering Manual Lathe Chuck Front Mount, Adjustable, Reversible, 3,500 Max Rpm, 1.654" Through Hole Diam, Forged Steel

Auto Strong Lathe Chuck N-204, 4" 3 Jaw Power Chuck (kitagawa B 204)

Strong Lathe Chuck N-204, 4" 3 Jaw Power Chuck. Chuck Was Never Used, Was Removed Off Lathe And Replaced By A Special Chuck.

Km Systems Km50ecms40 Clamp,lathe Km50 Rndshank 6.737mm Offset

Clamp.

New Kitagawa N-10 Three Jaw Lathe Chuck, A2-8

Chuck Was Removed From A New Machine And Replaced With A Special Chuck. With A2-8 Spindle Adaptor Plate. New Chuck, Never Used.

Used Kitagawa Lathe Chuck Bb-210, 10" 3 Jaw Power Chuck, . The Jaws Slide Very Smooth And It All Seems In Very Good Working Condition.

New Kitagawa Lathe Chuck B 206, 6" 3 Jaw, A2-5 (samchully Hs 06) M55x1.5 Thread

A2-5 Spindle Adapter. New, Never Used, Was Taken Off New Machine And Replaced By Special Chuck.

Btc 10" 4 Jaw D1-4 Independent Lathe Chuck 2 Piece Jaws Reversible

10" 4-jaw D1-4 Cam-lock Independent Lathe Chucks 2 Piece Jaws Reversible. Top Jaws Are Reversible. Lathe Chuck Wrench Supplied. Self Centering Jaws, Hardened And Precision Ground. Direct Mounting Chuck With Camlock Nose.

Lathe Truing Mandrels Lot Ground Cnc Turning Milling Haas. Lathe Truing Mandrels Lot Ground Cnc Turning Milling Haas

Lot Of (2) Smw Autoblok 16” (400mm) 400-nt Hydraulic Lathe Power Chucks

Lot Of (2) Smw 16 400-nt Hydraulic Lathe Power Chucks. These Units Are In Good Condition But Have Some Surface Rust, Wear, And Grime. You Get Both Chucks Pictured With No Other Accessories, Jaws, Or Attachments. They Come Exactly As Seen Pictured. See All Photos To Be Sure Of What Youre Getting And For The Best Idea Of Item Condition. Local Pickup In Woodruff, Sc. I Can Help Facilitate With Freight Shipping.

Abbott Aluminum Kttb212p1 Lathe Jaw,m16,aluminum

Abbott Aluminum Kttb212p1. Lathe Jaw,m16,aluminum. Avk Als4t-1024-130 Rivet Nut,knurled,steel,zinc Yellow,pk25. Administered By Bis, And The International Traffic In Arms Regulations Administered By Ddtc.

Kitagawa B-206 3 Jaw Lathe Chuck, M45 P1.5 Thread, A2-5 . Model B 206. A2-5 Spindle Adapter Plate. M 45 P 1.5 Draw Tube Nut Thread. Reassembled And Greased By A Qualified Chuck Service Man.

12 Inch Smw Tx-rv Hydraulic Lathe Chuck

12 Inch Smw Autoblok Tx-rv Hydraulic Lathe Chuck. This Came Off A Running Machine, And Is In Good Working Condition. The Chuck Will Include A Custom Locator, 1 Set Of Custom Id Jaws, And An A2-11 Spindle Nose Adapter Plate. Thanks For Looking! Serial #184

Smw Autoblok 175 Bb D (inch Serration) 6.88" Lathe Chuck, 3 Jaw Power Chuck

Smw Autoblok 175 Bb D, 6.88" Lathe Chuck, 3 Jaw Power Chuck. Chuck Was Never Used, Was Removed Off Lathe And Replaced By A Special Chuck. 6.88" O.d. (175 Mm). M54 P 1.5 Drawtube Thread Nut.

Value Collection 3 Jaws, 10" Diam, Self Centering Manual Lathe Chuck

Value Collection 3 Jaws, 10" Diam, Self Centering Manual Lathe Chuck Adjustable, Reversible, 2.835" Through Hole Diam, Cast Iron

Cushman20"3 Jaw Hydraulic Lathe Chuck Chuck20-74618-a11a W/backing Plate Unused

Appears Unused Still Has Factory Cosmoline All Over Please See Pics For Condition Local Pickup Or Your Arranged And Paid Shipping

Km Systems Km63cl2nsef Clamp,lathe Km63 Loc2 Side Acc Extended. Clamp.

Lathe Clamp Type Parting Cut Off Tool Holder 10mm Shank With 1/2" Hss Blade

Parting Blade Included . Blade Size. Versatile Tool For Rigid Clamping For Heavy Duty Cuts.

Km Systems Km40ecms32 Clamp,lathe Km40 Rndshank 5.390mm Offset. Clamp.

New Kitagawa Lathe Chuck B 210x, 10" 3 Jaw, A2-8, M88x2.0 Thread

New, Never Used, Was Taken Off New Mazak Lathe And Replaced By 12" Chuck. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M88 Thread If You.

Kitagawa B-10 3 Jaw Lathe Chuck, M75 P2 Thread A2-8 . Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M75 Thread If You. M 75 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

Km Systems Km40ncmss4025 Clamp,lathe Km40 Rnd Shank D40x110mm

Clamp.

Nice! Buck 8" Two-jaw Lathe Power Chuck W/ A2-6 Mount - #63f-64. This Is A 8" Two-jaw Lathe Power Chuck W A2-6 Mount. Made In The Usa By Buck Chuck. Chuck Thickness 4". Mount A2-6. Drawtube Adapter Threads 1-34"-16 Tpi. Through Hole 1-58".

Turret For An Okuma Lnc-8 Cnc Lathe. Milwaukee Area And Around The Country. We Have Over 28 Years Combined Experience In The Machine Tool Industry And Specialize In Cnc Machine Tools. Turret Only.

Royal 1/8" To 3-1/2" Heavy Duty Cnc Lathe Bar Puller W/ 1" Shank - #43368. Model # 43368. This Is A 18" To 3-12" Heavy Duty Cnc Lathe Bar Puller W 1" Shank. Made In The Usa By Royal Products. Capacity Range 18" To 3-12".

Km Systems Km40rcmivdi4060 Clamp,lathe Km40 Cmi Vdi Axial Rh D40x60. Clamp.

Samchully Syh-1869cc-k Hydraulic Cylinder Actuator For Cnc Lathe Chuck

Samchully Hydraulic Cylinder. Cylinder Has Low Hours On It Was Removed Off Lathe When Functioning And. Seom Hydraulic Cylinder. Also Cylinder Was Taken Apart, Seals Replaced And Inspected, Assembled And Tested For Function.

Id 3-1/2" Gripping Lathe Nose Mandrel W/ D1-6 Mount & 4" Mandrel. Cnc Lathe Turning Centers. Id 3-12" Gripping Lathe Nose Mandrel. Id Gripping Capacities 3.5" & 4". Press Brakes. Mount D1-6. We Can Setup Ltl Or Dedicated Trucking Loads For At The Most Competitive Prices.

6-jaw Lathe Chuck Self-centering Lathe Chuck For Turning Machine Accessories New

Description 6-claw Design Lathe Chuck Diameter 112 (mm) Positive Jaw Clamping Range 2-30 (mm) individual Jaws - Each Jaw Can Be Individually Adjusted For Clamping Rectangular And Irregularly Shaped Workpieces high-quality Materials - The Main Body Of The Chuck Is Made Of High Quality Cast Iron. All Rail And Bearing Surfaces Are Precision Machined Durable - Both Sides Are Ground And Hardened Scope Of Application - The Chuck Is Suitable For Machine Tools And Accessories Such As Ordinary Lathes, Economical Cnc Lathes, Grinding Machines, Milling Machines, Drilling Machines And Machine Tool Accessories. What's Included 1x 4.5" 6-jaw112mm Self-centering Lathe Chuck Weights & Dimensions Product Packaging Size 18*18*17cm Weight 4kg Specifications Model K13-100 Material Steel.

8" Bison 3 Jaw Lathe Chuck Direct Mount D1-4 Spindle

Whether Scroll, Independent Or Collet, These Chucks Have Been Replacing The Competitions For The Last 30 Years Without Sacrificing Production. 8" Bison 3 Jaw Self Centering. Precision, Three Jaw Scroll Lathe Chucks.

Steady Rest Turning Lathe 10" Hole Leblond Makino Lion Okuma Daewoo Mori Haas

In Good Used Shape, Does Show Normal Wear.

Km Systems Km40cl2sr1660c Clamp,lathe Km40 2 1 Sq Shank Replacem. Clamp.

1/4" 1 Morse Taper Collet High Precision 1mt Mt1 Round Chuck Lathe

14" #1 Morse Taper (mt) Collet. Hardened And Precision Ground Drawbar End 14"-20. Made Of High Grade Tool Steel.

Bison 3 Jaws, 8" Diam, Self Centering Manual Lathe Chuck. Bison 3 Jaws, 8" Diam, Self Centering Manual Lathe Chuck Front Mount, Adjustable, Reversible, 3,100 Max Rpm, 2.165" Through Hole Diam, Forged Steel

Value Collection 3 Jaws, 6" Diam, Self Centering Manual Lathe Chuck. Value Collection 3 Jaws, 6" Diam, Self Centering Manual Lathe Chuck Adjustable, Reversible, 1.535" Through Hole Diam, Cast Iron

Btc 14" 4 Jaw D1-6 Independent Lathe Chuck 2 Piece Jaws Reversible . 14" 4-jaw D1-6 Cam-lock Independent Lathe Chucks 2 Piece Jaws Reversible. Top Jaws Are Reversible. Lathe Chuck Wrench Supplied. Self Centering Jaws, Hardened And Precision Ground. Direct Mounting Chuck With Camlock Nose.

Shars 7/16" Self-ejecting Key For 8" & 10" Lathe Chuck New P. Square Size716 ". You May Ask For Freight Cost Before Buying Tools.

New Power Grip Hs-06 Lathe Chuck, M52 P 2 Thread, A2-5 (kitagawa B-206). M52 P2.0 Drawtube Nut Thread Size. Powergrip (power Grip) Lathe Chuck Hs-06, 6" 3 Jaw Power Chuck, New. Chuck Was Removed Off A New Machine And Replaced By A Special Chuck.

New Kitagawa N-05 Lathe Chuck, 5" 3 Jaw Power Chuck

Everything In Pictures Included.

Dunlap Craftsman 109 Lathe Steady Rest Adapter / Kit. Adapts A Sieg C0 Steady Rest (1.5" Od Capacity) To Your Dunlap Craftsman 109 Lathe Model Number Ending In "630" (example 109-20630). This Is One Of The Most Common Variations Of The Craftsman 109.

Unthreaded Backplate/adapter For 4" Lathe Chucks (3900-3305). Unthreaded Backplateadapter For 4" Lathe Chucks. For 3 & 4-jaw Chucks. Machine Tool Accessories. No Bolt Holes. Why Should You Buy From Us. Get It Quick!

Rebuilt Kitagawa S1875-21 Hydraulic Cylinder Actuator For Cnc Lathe Chuck(s1875). This Cylinder Is Interchangeable With The S1875. I Rebuild Chuck Cylinder Actuators. This Cylinder Is As Good As A New Cylinder. (40 Kgfcm Squared). Cylinder Had A Complete Rebuild Consisting Of.

10" 3 Jaw Self Centering Plain Back Lathe Chuck Reversible Tir Certificate R[

Shars 10" 3-jaw Reversible Jaws Self-centering Lathe Chuck +. 0039" Tir Runout Certificate New. Both Side Of Jaw Teeth And Guides Are Ground And Hardened To Hrc 58-62. Internal Jaw External Jaw. Semi-steel Chuck Body Made From High Quality Cast Iron.

New Sca Sweden Heavy Duty 12" 4-jaw Independent Lathe Chuck. L0 L-0 Back. New Sca Sweden 12" 4-jaw Independent Lathe Chuck. L0 Back. $1825 List. . The Chuck Is Shiny And New But We Could Not Get The Lighting Right. A Beautiful Tool Featuring The Finest European Craftsmanship, And Materials. Premium Quality. Please See Additional Pictures Below The Description.

Shars 6" 3 Jaw Self Centering Lathe Chuck Reversible Jaw .003 Tir Certificate L[. Internal Jaw External Jaw. Both Side Of Jaw Teeth And Guides Are Ground And Hardened To Hrc 58-62. Semi-steel Chuck Body Made From High Quality Cast Iron. 3 Piece Of Mounting Screws For The Lathe Chuck Back Plate.

New Atlas Workholding Lathe Chuck Atl8-a6, 8" 3 Jaw Chuck (kitagawa B 208)

Pratt Burnerd Atlas Workholding. Blank Drawtube Nut Can Be Machined To Fit Your Lathe Drawtube Thread Size. With A2-6 Spindle Adaptor Plate.

Lot Of (2) Smw 12” 320te 2+2+2 (6 Jaw) Hydraulic Lathe Chucks

Lot Of (2) Smw 12 320te 2+2+2 (6 Jaw) Hydraulic Lathe Chucks. These Units Are In Very Good Condition So The Only Some Minor Surface Rust And Grime. One Was Protected In A Protective Wax And Is Possibly Unused. One Of Them Includes The Mounting Bolts But No Other Accessories Are Included. They Come Exactly As Seen Pictured. See All Photos To Be Sure Of What Youre Getting. Local Pickup In Woodruff, Sc. I Can Help Facilitate With Freight Shipping.

New Kitagawa Lathe Chuck Bb206, M60 P1.5 Thread, A2-5 (samchully Mh-206) . M60 X 1.5 Drawtube Adapter Nut. A2-5 Spindle Adapter.

4-inch Self-centering Lathe Chuck Compact Functional Chuck 1inch X 8tpi Thread

Scroll Chuck Perfect For Holding Bowls, Spindles, And Other Unwieldy Wood Lathe Projects. Full Steel Lathe Chuck Body, Jaws Are Quenched And Hardened. The Chuck Will Not Rust Easily In A Dry Circumstance, Enabling Longer Service Life.

Buck-forkardt 10" 2-3 Jaw Power Lathe Chuck, New Chuck. Parts Available Through Buck Chuck. A2-8 Spindle Adapter Plate. New Chuck, Never Used.

Km Systems Km40cl2sl1660d Clamp,lathe Km40 2 1 Sq Shank Replacem. Clamp.

Pratt Burnerd 3-jaw Cnc Lathe 6-3/4" Chuck 9827-18110

Pratt Burnerd 3-jaw Cnc Lathe Chuck.

10" Itw Woodworth 4 Jaw Ball Lock Power Lathe Chuck. Approximate Weight 80 Lbs. This Part Was Pulled From A Working Machine, And Is Being Sold In Good Working Condition Unless Otherwise Stated! This Part Was Pulled From A Working Machine. We Have No Way Of Testing It.

Kitagawa B-208 3 Jaw Lathe Chuck, M60 P1.5 Thread A2-6 (samchully Hs-08)

Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M60 P 1.5 Thread If You. M 60 P1.5 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

Km Systems Km40ncmef Clamp,lathe Km40 Ncm Xflngmnt Height:2

Clamp.

7/16" R8 Round Collet High Precision Tooling For Bridgeport Or Lathe Fixture

716" (.4375) R8 Round Collet. Hardened And Precision Ground. Made Of High Grade Tool Steel. Our Part # All-41013.

7/16" 2 Morse Taper Collet High Precision 2mt Mt2 Round Chuck Lathe Spindle

716" #2 Morse Taper (mt) Collet. Hardened And Precision Ground Drawbar End 38"-16. Made Of High Grade Tool Steel. Our Part # All-41306.

15” Lathe Chuck Adapter Plate A1-11 Spindle Mount (loc39)

Adapter Type A-1. Mount A-11. Condition Used.

A2-8 Lathe Spindle Collet Nose Hardinge S30 Master & (21) Sets Of Collet Pads

Includes Hardinge S30 Cone Master Collet. Hardinge 2-34" Serrated. Hardinge 2-12". Hardinge 1-78". Hardinge 1-34". Hardinge 1-516". Hardinge 1". Hardinge 58".

Km Systems Km50ncmf Clamp,lathe Km50 Ncm Xflngmnt Height:1. Clamp.

Hss Blades 3/16" X 1" (wide) X 6"(long) For Lathe Parting Cut Off -usa Fulfilled. M2 Grade Hss Parting Cut Off Tool Holder Spare Blades. Blades Are Hardened & Ground. Blade Size316" (thickness) X 1" (wide) X 6"(long) Trapezoidal In Shape.

8 Pcs Expanding Arbors Set Mandrels 1/4" To 1-1/4" Lathe Milling High Precision. 8 Pcs Set 14", 38", 12", 58", 34", 78", 1", 1-14with Allen Wrenches On A Handy Wooden Standsupplied With Alloy Wrenches And Wooden Stand by Placing In Your Machine & Expanding The Arbor, You Can Machine The Arbors To The Precise Diameter & Length For Your Jobused In Research & Development Work, For Large Or Small Shops In Lathes, Milling Machines, Grinders, Chucks, Collets, Fixtures Brand Thomletha Mpn Gm397360 Upc Does Not Apply.

Smw Omnirest Em2.1 .78 To 3.93 Cap. Good Used Steady Rest From Mazak Cnc Lathe

Smw Em2.1 Omnirest Turn Through Hydraulic Steady Rest. Had Been Used On Mazak Cnc Lathe, We Do Not Have The Mounting Plate. Approx 70 Lbs.

Er32 Collet 11 Pcset Mt2 Shank Chuck Tools For Milling Machine, Lathe, Drilling

Mt2 Shank Er32 Chuck With Collet Set. 1 Pc Mt2 Shank Er32 Collet Chuck. Draw Bar Threads 38 X 16. 11pc, Er32 Collet Set 18 - 34 By 16th (18, 316, 14, 516, 38,716,12, 916, 58, 1116, 34).

Km Systems Km63ncmss40162 Clamp,lathe Km63 Rnd Shank D2-1/2x1.62. Clamp.

Kitagawa Sr1453c Hydraulic Cylinder Actuator For Lathe Power Chuck

Samchully Hydraulic Cylinder. Seom Hydraulic Cylinder.

Km Systems Km32ncm3225 Clamp,lathe Km32 Ncm Sq Shank 1.562 X. Clamp.

Km Systems Km40cl2nsef Clamp,lathe Km40 2 Flange Mount Side. Clamp.

Btc 14" 4 Jaw D1-8 Independent Lathe Chuck 2 Piece Jaws Reversible . 14" 4-jaw D1-8 Cam-lock Independent Lathe Chucks 2 Piece Jaws Reversible. Top Jaws Are Reversible. Lathe Chuck Wrench Supplied. Self Centering Jaws, Hardened And Precision Ground. Direct Mounting Chuck With Camlock Nose.

Autoblok 250bh Hydraulic Cnc Lathe Chuck 10 Inch 3 Jaw

Model 250bh. Autoblok Hydraulic Lathe Chuck.

Km Systems Km40ncm3228 Clamp,lathe Km40 Ncm Sq Shank 1-3/4 X

Clamp.

New Sca Sweden 2pc Jaw Steel 10" 3-jaw Precision Lathe Chuck D1-5 Back $2733

New Sca 10" Steel 3-jaw Lathe Chuck. D5 Back. Part Number 8310 D5. Made In Sweden This Sale Is For New Sca 10" 3-jaw Lathe Chuck. D1-5 Direct Mount Back. . Made In Sweden. A Beautiful Tool Featuring The Finest European Craftsmanship , And Materials . Comes Covered In Protective Packing Grease , Easily Cleaned Off With Some Solvent To Reveal Beautifully Machined And Ground Steel Body And Hardened Pinions, Scroll And Jaws. $2733 Usd List.

Lathe Chuck K11-100 4'' 3 Jaw Self Centering Milling Machine External Jaw. This Versatile Chuck Is Made Of High-quality Hardened Steel,compression Resistance And Has A Long Service Life. It Has Two Sets Of Jaws That Can Hold Industrial Parts In The Range Of 0.078" 2 Mm - 3.54" 90 Mm.

Km Systems Km32ncmef Clamp,lathe Km32 Ncm Xflngmnt Height:2

Clamp.

Shars 2" Precison 5c Step Collet For Lathe Collets New P[

Heat Treated Tool Steel Collet Shank. Precisely Ground All Over. You May Ask For Freight Cost Before Buying Tools. Soft Head For Easy Machining. If You Need To Speak To A Sales Person Feel Free To Call.

Er32 Er40 Square Hex Collet Block Chuck Holder For Cnc Lathe Engraving Machine. Er40 Square 1pc Er40 Square Collet Block. Er40 Square Collet Block Er40 Hex 1pc Er40 Hex Collet Block. Er40 Square+hex 1pc Er40 Square Collet Block And 1 Pc Er-40 Hex Collet Block. Er40 Hex Collet Block.

New Sca Sweden 12" 4-jaw Independent Lathe Chuck. L0 L-0 Direct Mount Back. Nos Sca Sweden 12" 4-jaw Independent Lathe Chuck. L0 Back. Part Number Hd50611l0. $1825 List. . The Chuck Is Shiny And New But We Could Not Get The Lighting Right. A Beautiful Tool Featuring The Finest European Craftsmanship, And Materials. Premium Quality. Please See Additional Pictures Below The Description.

Km Systems Km63ncmef Clamp,lathe Km63 Ncm Xflngmnt Height:4. Clamp.

Vintage 3at 3/16” Lathe Collet. It Needs A Good Cleaning.

New Sca Made In Sweden 10" 4-jaw Independent Lathe Chuck. Plain Back. $1543. Nos Sca Sweden 10" 4-jaw Independent Lathe Chuck. Plain Back. Part Number Hd50610. Made In Sweden A Beautiful Tool Featuring The Finest European Craftsmanship, And Materials. Please See Additional Pictures Below The Description.

4-piece Brake Lathe Bell Clamp & Cone Set For Large Trucks - 1" Arbor Usa Made. Medium To Heavy Duty Truck Brake Lathe Large Bell Clamp & Cone 4-piece Set For 1" Arbors Save Time With This Large Truck Bell Clamp And Cone Set For Medium Duty And Heavy Duty Trucks. This Set Comes With 1 Cone, 2 Bell Clamps And 1 Heavy Duty Spring (see Cone & Bell Clamp Sizes Below) ---(2) 9-14" Bell Clamps ---(1) 7.578" To 8.125" Cone ---(1) Heavy Duty Spring Part # 3026-1 We Also Carry Other Tire Changer, Wheel Balancer, Brake Lathe And Alignment Shop Tools. Check Out Our Ebay Store For More Information.

Km Systems Km50ncmss32125 Clamp,lathe Km50 Rnd Shank D2.0x1.25. Clamp.

New Kitagawa Y1225re47 Hydraulic Cylinder Actuator For Cnc Lathe . Cylinder Was Taken Off New Lathe And Replaced With Special Cylinder.

Er-32 Er-40 Hex Collet Chuck Holder & Square For Cnc Lathe Engraving Machine. Er-32 Hex Collet Block Er-32 Square Collet Block Material Hard Steel. Through Hole Allows For Long Parts To Be Machined. We Do Our Best To Resolve Any Issue. We Will Provide You With The High Quality Service.

Microcentric 6-120 Lathe Chuck With Inbuilt Air Cylinder, 6" Dia

Inbuilt Air Cylinder. Chuck Was Used For A Small Production Run And Then It Sat On A Shelf For Ten Years. Reassembled With All New Seals And Oiled By A Qualified Chuck Service Man. Pneumatic Chuck.

Kitagawa Hjd6-10-1a 3 Jaw Power Lathe Chuck With D1-6 Spindle Adapter Cam Lock

With D1-6 Cam Lock Spindle Adaptor. Reassembled And Greased By A Qualified Chuck Service Man. Ready To Run. Excellent Condition.

Mori-seiki Mr 2000 Lathe Chuck, 3-jaw Self Centering, 12"

12" 3-jaw Self Centering Lathe Chuck. Used, Very Goodcondition. A2-6 Mounting. 2 Piece Steeljaws. Steel Body. Heavy Duty.wason Mori Seiki Mr 2000 Engine Lathe.free Shipping. Continental Usa Only.

Samchully Mh-210vi 3 Jaw Lathe Chuck, M90 P2 Thread A2-8 (kitagawa Bb-210). Samchully 3 Jaw Power Lathe Chuck. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M90 Thread If You. M 90 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

South Bend 9" & 10k Z Axis Metal Lathe Dial Indicator Mount Clamp - Aluminum. South Bend 9" & 10k Z Axis Dial Indicator Mount Clamp - Machined Billet Aluminum. For Sale Is A Dial Indicator Mount For 9 & 10k South Bend Lathes In Addition To Logan 820 & 200 Lathes. Clamp Only! The Dial Indicator Is Not Included.

New Howa 8" Lathe Chuck H037m8, Blank Drawtube Nut, Flat Back

Howa Cnc Lathe Chuck H037m8, 8" 3 Jaw Power Chuck, New, Never Used. Blank Draw Tube Nut. Flat Back, Ready To Mount Spindle Adaptor Plate.

New Howa Hydraulic Cylinder Actuator For Lathe Power Chuck C1sa125 M-4780



Pratt Burnerd 12" 2-jaw Lathe Chuck. Refurbished Lj#2105.

Smw Autoblok 120/46 Vsn Hydraulic Cylinder Actuator For Lathe Chuck 33094314

Part Number 33094314. Smw Autoblok 12046 Vsn Hydraulic Cylinder For Cnc Lathe Chuck. Cylinder Has Low Hours On It Was Removed Off Lathe When Functioning And. Samchully Hydraulic Cylinder. Seom Hydraulic Cylinder.

Km Systems Km40ncmf Clamp,lathe Km40 Ncm Xflngmnt Height:1

Clamp.

Kitagawa S1552 Hydraulic Actuator Cylinder For Cnc Lathe . Precision Finished Piston Bores And Cool Running Rotary Unions Are Included For Years Of Trouble-free Performance. Hardly Used! Removed From A Functioning Lathe To Install An Air Chuck. Net Weight (kg) 16.8.

8” Steel Hard Jaws 1.5mm X 60° Serrated For Kitagawa B-208 Type Lathe Chucks. Jaw Type Fits B-208 Cnc Lathe Chucks (hardened And Ground) With 1.5mm X 60 Serrations. Style Hardened And Ground Jaw Designed For 1st Operation Roughing. Hole Space 25mm (0.984). Qty Set Of 3 Pcs.

8" Aluminum Soft Jaws 1.5mm X 60° Serrated For B-208 Type Lathe Chucks (2.0" Ht). 1 Set Of Aluminum Pointed Soft Jaws For 8" B208 Type Chucks. Jaw Type Fits Cnc Lathe Chucks With 1.5mm X 60 Degrees Serrations. Hole Space 0.984" (25mm). Material Aluminum 6061-t6511 (material Produced In Usa - Mill Iso 90012008 Certified).

5/16" Square Lathe Chuck Key With 7" Wide T-handle ~new~

516" Square Lathe Chuck Key. Unless Other Provisions Are Necessary. Total Weight1 Lb. 7" T-handle.

5" 4-jaw Lathe Chuck W Independent Jaws Rear Mounting #0504f0 K72 125

5" 4-jaw Lathe Chuck With Independent Jaws, With Rear Mounting K72 125mm. Mounting Screw Threads 3-m8.

Kitagawa Nlt08 2 Jaw Lathe Chuck, A2-6 Spindle Mount.. Model Nlt08. A2-6 Spindle Adaptor Plate. Reassembled And Greased By A Qualified Chuck Service Man. Ready To Run.

New Samchully Lathe Chuck Has-08, M58 P1.5 Thread, A2-6 (kitagawa B 208)

Samchully Lathe Chuck Has-08, 8" 3 Jaw Power Chuck, New. M58 P1.5 Drawtube Thread Size. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M58 Thread If You. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

Reishauer / Alina 6" Lathe Scroll / Bezel Chuck 5c Arbor.